Why Should I use Quickdrain?

Changing the water in your spa is an important and necessary part of its maintenance. Prolonged use of old, unbalanced water creates scale build-up and is corrosive to spa components. Frequent water changes improve water chemistry and provides a fresher, cleaner and healthier spa experience.

How can Quickdrain help?

Quickdrain is a hand-held, self-priming siphon that vacuums as it drains. The siphoning action drains the water, creating suction to vacuum the debris from your tub. When Quickdrain 's discharge hose is placed lower than the bottom of your spa, a few quick pumps of Quickdrain starts the water flowing.

Is Quickdrain easy to use?

Yes! And quick too! In three easy steps, Quickdrain will clean your hot tub, spa or any above ground water source. Just follow these instructions:

1. Insert Quickdrain into the water. Position discharge hose so it lies below the bottom of the tub being drained.

2. Pump Quickdrain up and down, with 15 long, fast strokes to establish water flow. To maximize flow, wait a minute and then pump 5 to 10 more times. Maneuver Quickdrain to vacuum debris as it drains.

3. When water level is low, angle tip of Quickdrain flush with tub or spa floor. Carefully maneuver and watch to ensure all the water is completely drained.

How often should I change my spa's water?

Daily use by a typical family of four should change their spa's water every six weeks. Here's a quick formula to help you calculate when to change your spa's water:

Where does all the water go?

Quickdrain's 11 feet of discharge hose allows water to drain a good distance from your spa. If you would prefer a greater distance, just pick up a Quickdrain Extension Hose Kit to increase your options 24 feet at a time. Whether you add 24 or 240 feet, Quickdrain provides the flexibility you need.

With Quickdrain , speed is a virtue, especially during cold weather conditions. When using Quickdrain you can expect water to drain an average of 10 US gallons per minute.